Mavic Deemax Park 29 Wheelset

The Mavic Deemax Park 29" wheelset is designed to withstand the hardest landings and most extreme impacts in Freeride, Downhill (DH), Dirt, and aggressive Enduro (ASTM Category 5). Developed in collaboration with riders from the Mavic Team, this ultra-strong Maxtal aluminum wheel features 32 J-Bent spokes and Pinch Flat Protection (PFP) technology to reduce the risk of flat tires by 20%. Versatile, easy to repair, and built to last, it lets you tackle doubles and gravity trails with complete peace of mind.

Mavic Deemax Park 29" wheelset highlights

• Ultra-robust 32-spoke design: 3-cross lacing with 32 steel J-Bent spokes for maximum strength during hard landings and under lateral loads.
• PFP (Pinch Flat Protection) technology: Wider rim wall profile drastically reduces the risk of tire cuts and pinch flats.
• 30 mm internal width: Asymmetric Maxtal alloy rim provides ideal tire support for wide tires (47 mm to 76 mm).
• CLASSIC ID360 hubs (24 teeth): Low-maintenance Instant Drive 360 freehub system (15° engagement), tool-free to disassemble and built to last.
• Mavic repairability and durability: Easy-to-replace J-Bent spokes, Tubeless rim tape factory-installed, and 2 spare spokes included per wheel.
• Versatile wheelset & adaptable axles: Available with a 20x110 mm Boost or 15x110 mm Boost front axle and a 12x148 mm Boost rear axle

Technical specifications

• Riding style: Freeride, Downhill (DH), Dirt, Enduro, Bike Park (ASTM Category 5).
• Wheel size: 29" (ETRTO size: 622x30TC).
• Rim material: Maxtal aluminum alloy (SUP machined welded joint).
• Rim height: 22 mm.
• Internal width: 30 mm (asymmetric Tubeless Ready profile).
• Rim drilling / spoke holes: Traditional drilling (32 holes front and rear).
• Spokes: 32 round, J-Bent steel spokes per wheel, 3-cross lacing.
• Hubs: CLASSIC aluminum design with QRM Auto sealed cartridge bearings.
• Freehub system: Instant Drive 360 (24-tooth ratchets / 15° engagement).
• Freehub bodies included:
    - Shimano HG (with cassette spacer)
    - Sram XD
    - Shimano Microspline
• Rotor standard: 6-bolt (IS) mount only.
• Axle standards:
    - Front: 20x110 mm Boost or 15x110 mm Boost
    - Rear: 12x148 mm Boost
• Manufacturer's weight: 2,545 g per pair (Front: 1,200 g / Rear: 1,345 g).

Construction and materials

• Rims: 100% Maxtal aluminum alloy (SUP welded)
• Spokes: 100% steel (J-Bent)
• Spoke nipples: Steel with colorless ABS thread locking compound
• Hubs: Aluminum bodies and axles
• Bearings: Sealed cartridge bearings (QRM Auto technology)

Maintenance tips

• Rinse the wheels with fresh water after every bike park session (avoid using pressure washers directly on the hubs).
• Check the tension of all 32 spokes regularly to maintain wheel alignment and stiffness.
• ID360 hub maintenance: Remove the freehub body by hand without tools to clean and grease the 24-tooth ratchets.

Compatibility, tires, and installation

For optimal performance and safety on gravity trails, be sure to follow the recommended tire pressure and tire specifications.

• Approved tire widths: Minimum tire width of 47 mm (1.85") to maximum of 76 mm (3.00").
• Maximum approved pressures: 47 mm tire: max 3.6 Bar / 52 PSI — 76 mm tire: max 2.45 Bar / 36 PSI.
• Weight limit: Maximum weight supported by the wheels: 150 kg (including bike weight).

What's included and Tubeless setup

• Included accessories: User guide, UST rim tape (preinstalled), UST valves (not installed), HG cassette spacer, and 2 spare spokes per wheel.
• Tubeless Ready setup: With the rim tape preinstalled, install the included UST valves, fit your Tubeless tires, and add the recommended amount of sealant.