Mavic Deemax Park 26 Wheelset

The Mavic Deemax Park 26" wheelset was designed to handle the hardest landings and most extreme impacts in Freeride, Downhill (DH), Dirt, and aggressive Enduro (ASTM Category 5). Developed in collaboration with Team Mavic riders, this ultra-strong Maxtal aluminum wheel features 32 J-bend spokes and Pinch Flat Protection (PFP) technology to reduce the risk of pinch flats by 20%. Versatile, easy to repair, and built to last, it lets you tackle doubles and Gravity trails with total peace of mind.

Mavic Deemax Park 26" wheelset highlights

• Ultra-strong 32-spoke design: 3-cross lacing with 32 J-bend steel spokes for maximum strength during heavy landings and under lateral forces.
• PFP (Pinch Flat Protection) technology: Wider rim-wall profile drastically reduces the risk of tire cuts and pinch flats.
• 30 mm internal width: Asymmetric Maxtal alloy rim provides ideal tire support for wide tires (47 mm to 76 mm).
• CLASSIC ID360 hubs (24 teeth): Low-maintenance Instant Drive 360 freewheel system (15° engagement), tool-free to disassemble and built to last.
• Mavic repairability and durability: Easy-to-replace J-bend spokes, factory-installed Tubeless rim tape, and 2 spare spokes included per wheel.
• Versatile wheelset & convertible axles: Supplied with adapters to convert the 20x110 mm front axle to 15x110 mm Boost.

Technical specifications

• Riding style: Freeride, Downhill (DH), Dirt, Enduro, Bike Park (ASTM Category 5).
• Wheel size: 26" (ETRTO size: 559x30TC).
• Rim material: Maxtal aluminum alloy (SUP welded and machined joint).
• Rim height: 22 mm.
• Internal width: 30 mm (asymmetric Tubeless Ready profile).
• Rim drilling / spoke holes: Traditional drilling (32 holes front and rear).
• Spokes: 32 round J-bend steel spokes, 3-cross lacing.
• Hubs: CLASSIC aluminum design with QRM Auto sealed cartridge bearings.
• Freewheel system: Instant Drive 360 (24-tooth ratchets / 15° engagement).
• Freehub body:
    - Shimano HG (with cassette spacer)
    - Sram XD
• Disc standard: 6-bolt (IS) mount only.
• Axle standards: Front 20x110 mm (convertible to 15x110 mm) / Rear 12x142 mm.
• Manufacturer's weight: 2,250 g per pair (Front: 1,005 g / Rear: 1,245 g).

Construction and materials

• Rims: 100% Maxtal aluminum alloy (SUP weld)
• Spokes: 100% steel (J-bend)
• Spoke nipples: Steel with colorless ABS thread lock
• Hubs: Aluminum bodies and axles
• Bearings: Sealed cartridge (QRM Auto technology)

Care instructions

• Clean the wheels with fresh water after each bike park session (avoid using a pressure washer directly on the hubs).
• Regularly check the tension of all 32 spokes to maintain wheel alignment and stiffness.
• ID360 hub maintenance: Remove the freehub body by hand without tools to clean and grease the 24-tooth ratchets.

Compatibility, tires, and installation

For optimal performance and safety on Gravity trails, follow the recommended tire and pressure guidelines.

• Approved tire widths: Minimum tire width of 47 mm (1.85") to maximum of 76 mm (3.00").
• Maximum permitted pressures: 47 mm tire: max 3.6 Bar / 52 PSI — 76 mm tire: max 2.45 Bar / 36 PSI.
• Weight limit: Maximum weight supported by the wheels: 150 kg (including bike weight).

Package contents and Tubeless setup

• Included accessories: User guide, UST rim tape (preinstalled), UST valves (not installed), front axle adapters (20x110 mm to 15x110 mm), and 2 spare spokes per wheel.
• Tubeless Ready setup: With the rim tape preinstalled, install the included UST valve and your Tubeless tire, then add the recommended amount of sealant.