Effetto Mariposa Caffelatex Tubeless tape

Replacing standard rim-tape, Effetto Mariposa Caffélatex Tubeless Tape perfectly adapts to rim internal profile and makes standard rims air-tight, sealing spoke holes. It allows tubeless conversion of most standard mountain bike wheels, using Tubeless or Tubeless-Ready tyres and Caffélatex sealant.

Features

• Polyester
• A single layer can stand high pressure
• replacing standard rim-tape, perfectly adapts to rim internal profile and makes standard rims air-tight, sealing spoke holes
• Caffé Tubeless Tape will allow the use of Tubeless, Tubeless-Ready and TNT (Tube No Tube) tyres
• Widths available :
    - 20,5mm, for rims with external section from 16 up to 20 mm
    - 25 mm, for rims with external section from 20 up to 25 mm
    - 29 mm, for rims with external section from 25 up to 29 mm
    - 34 mm, for rims with external section from 29 up to 34 mm
    - 40 mm, for rims with external section from 34 up to 40 mm
    - 45 mm, for rims with external section from 40 up to 45 mm
• 2 lengths :
    - 5 m (for 2 wheels)
    - 50 m (for shop)
• Warning : Before gluing Caffé Tape inside the rim, carefully clean the rim-bed, removing any trace of grease or lubricant (use alcohol or other de-greaser, then clean carefully with a clean, dry cloth. Adhesion of the tape on dried-up alcohol is not good). Use a sharp spike or a screwdriver to make a round hole in Caffé Tubeless Tape at the valve hole. AVOID using a cutter knife and doing an “X” cut, that would prevent proper air-tightness at the valve base.