Hope Gravity Stem 20 mm Orange

Hope Gravity 20 mm MTB Stem: Designed for Performance

The Hope Gravity 20 mm MTB stem was developed for Gravity riding, including Enduro, Downhill (DH), Bike Park, and E-MTB. Its ultra-short 20 mm length creates a very compact cockpit and brings the handlebar closer to the fork steerer for precise control on the steepest, most technical sections.

Hope developed this stem based on feedback from World Cup Downhill and Enduro riders, with the goal of optimizing rider positioning and bike control. The 35 mm stack also gives the cockpit a specific height that should be considered when adjusting your riding position.

CNC-Machined 2014-T6 Aluminum

True to the British brand Hope’s expertise, this stem is a genuine work of mechanical craftsmanship:

• Machined from solid: CNC-machined from a high-strength 2014-T6 aluminum block for an exceptional weight-to-stiffness ratio, allowing Hope to precisely control the part’s geometry and dimensions.
• Ultra-Short Length (20 mm): Ideal for modern frames with Forward Geometry (long reach), delivering exceptionally responsive steering and an aggressive riding position.
• The handlebar clamp area is 5 mm wider to increase the stiffness and strength of the assembly. The stem also features an integrated headset cap, with compression bolt included.

Indestructible Design for Extreme Riding

Designed to withstand the most extreme forces:

• Large contact area: The handlebar clamp area is 5 mm wider to reduce flex under heavy loads and distribute pressure evenly across carbon or aluminum handlebars.
• Iconic anodized finish: Available in Hope’s 7 signature colors to customize every detail of your bike.

Key Features

• 20 mm length for a very compact cockpit
• 35 mm stack
• CNC-machined from solid 2014-T6 aluminum
• Clamp width increased by 5 mm for greater system stiffness
• Compatible with 31.8 mm and 35 mm handlebars
• Integrated headset cap and compression bolt included
• Developed for Enduro, DH, Bike Park, and E-MTB riding
• Available in 7 Hope anodized finishes for added customization

Technical Specifications

• Model: Gravity Stem 20mm
• Use:  Enduro, Downhill (DH), Bike Park, VTTAE (E-MTB)
• Length:  20 mm
• Stack: 35 mm
• Max insertion: 33.5 mm
• Min insertion: 31 mm
• Handlebar clamp spacing increased by 5 mm for greater stiffness
• Handlebar diameter (depending on option):
  • 35 mm, or
  • 31.8 mm
• Steerer diameter: 1 1/8" (Standard)
• Material: CNC-machined 2014-T6 aluminum
• Hardware: High-strength stainless steel
• Integrated stem cap
• Stem cap bolt included
• Made in: Barnoldswick, England