MRP Ramp Control for Rock Shox Solo Air - Version C

MRP Ramp Control for Rock Shox Solo Air adds speed-sensitive ending-stroke control and bottom-out force adjustability to your compatible Rock Shox Solo air fork. It's very eay to install and requires little time and few tools as you do not have to remove the lower legs. There are 5 versions of the Ramp Control depending on the fork where it will be installed.

Features

• Adds speed-sensitive ending-stroke control and bottom-out force adjustability to compatible Rock Shox forks
• Only compatible with Solo Air forks
• Just 55 g! Lighter than most air-spring assemblies with more than two tokens.
• Isolate and tune bottom-out with minimal changes to initial and mid-stroke.
• Bring your tuning to the trail and out of the workshop!
• Easy installation requires little time and few tools - no lower-leg removal required! Manual clamping.
• 5 version : A, B, C, D and E
• A version for RS 35 mm (140 mm +) is for 2013-2016 Pike forks with 15x100 axle spacing and 2010 and newer Boxxer World Cup (air-sprung) forks. Recommended for 140mm+ 29”,27.5+, 26” and  27.5” forks
• B version for RS 35 mm (140 mm +) is for 2015 and newer Pike forks with "Boost" 15x110 axle spacing, all 2017 Pike forks, and all 2015 and newer Lyrik and Yari forks (regardless of axle spacing). Recommended for 140mm+ 29”,27.5+, 26” and  27.5” forks.
• C version for RS 35 mm (120-130 mm) is for 2013-2016 Pike forks with 15x100 axle spacing. Recommended for 120 and 130mm 29”/27.5+ and 120mm 27.5” and 26” forks
• D version for RS 35 mm (120-130 mm) is for2015 and newer Pike forks with “Boost” 15x110 axle spacing, all 2017 Pike forks, and all 2015 and newer Lyrik and Yari forks (regardless of axle spacing). Recommended for 120 and 130mm 29”/27.5+ and 120mm 27.5” and 26” forks
• E version for RS 32 mm (100-140 mm) is for 2013 and newer Reba, Revelation, and SID forks and 2014 and newer Rock Shox Bluto forks. Recommended for 100-140mm 29”, 27.5+, 27.5”, 26”, and Fat forks (Not recommended for Revelation 100-110 mm)

More infos about compatibility : http://www.mrpbike.com/rampcart/

Weight : 55 gr