The Renthal Fatbar DH V3 D31.8 handlebar (Bronze / AluGold) is the ultimate aluminum handlebar for Downhill (DH), Freeride, and aggressive Enduro. Available with rises from 10 to 40 mm
The Renthal Fatbar DH V3 D31.8 handlebar (Bronze / AluGold) is the ultimate aluminum handlebar for Downhill (DH), Freeride, and aggressive Enduro. With eight Downhill World Championship titles to its name, this iconic handlebar offers an unmatched strength-to-weight ratio thanks to its exclusive 7010 T6 aluminum alloy and computer-designed variable-thickness tapered profile. Featuring a shot-peened, hard-anodized finish and an 800 mm width, the Renthal Fatbar V3 combines light weight, vibration absorption, and pinpoint precision to help you ride faster and harder on the most demanding trails.
Key features of the Renthal Fatbar DH V3 D31.8 handlebar
Exclusive 7010 T6 aluminum alloy: Formulated specifically for Renthal to maximize mechanical strength while effectively filtering high-frequency trail vibrations.
Industry-leading strength-to-weight ratio: Variable-thickness internal profiling (taper wall) reduces unnecessary weight without compromising the Fatbar's signature stiffness or controlled flex.
Shot-peened, hard-anodized finish: The shot peened surface treatment significantly increases metal fatigue resistance, while hard Bronze / AluGold anodizing resists abrasion and corrosion.
800 mm width: Increased steering stiffness for absolute control through hard turns and rough sections, while also suited to aggressive Trail riding and e-MTBs.
Etched alignment and cut marks: Center positioning grid at the stem clamp for precise alignment, plus measurement marks at the ends for custom trimming.
Race-grade manufacturing and quality control: Manufactured exclusively at the Renthal factory using an advanced 17-step process and tested in collaboration with the top DH World Cup teams.
Surface treatment: Full shot peening and scratch-resistant hard anodizing
Markings: Highly durable permanent graphics and center adjustment grid
Installation tips and maintenance recommendations
Stem compatibility: This handlebar has a 31.8 mm center diameter; use only with a 31.8 mm standard stem (not compatible with 35 mm stems).
Torque: Center the handlebar using the center grid, then tighten the stem faceplate bolts in a cross pattern, carefully following the torque recommended by the stem manufacturer (generally between 5 and 6 Nm) to avoid excessive stress on the aluminum.
Adjusting the width: To reduce the width, use a suitable pipe cutter or a hacksaw with a guide, following the measurement marks at the ends. Carefully deburr the edges before installing your grips.
Post-crash inspection: After a hard impact or significant crash, carefully check the handlebar for deformation or deep damage before riding again.