This oval chainring with special 3mm offset converts any Sram crank into Boost148 specific setup needed in Boost equipped bikes. Boost and non-Boost Sram cranks are identical. All the offset is achieved by the chainring itself, so you can use any Sram crank for this conversion. Our regular GXP OVAL chainrings have 6mm offset whether this one has 3mm, but both chainrings look very similar.Oval rings make the spin cycle a lot smoother and are easier on legs while climbing. Believe it (or not), but a round chainring doesn't transfer torque to your rear wheel as smoothly as an Oval one. You will actually feel your stroke to be more "round" with an Oval shape than with a round chainring. Why it matters ? Traction, Traction and Traction. With oval rings, rear tire traction improves greatly on loose and slippery terrain. Your legs will be less tired and your speed improved. Climbing will become easier then ever before. It is world's best oval chainring. These premium 1X Sram Direct mount BOOST148 compatible Oval chainrings are designed for GXP® and Long BB30 spindle cranks. Chainring is dedicated for Boost148 bikes ONLY. Converts a regular Sram crank into a Boost specific setup.
Features
Material : CNC machined 7075 Txxx Aluminum. Long-lasting
Finish : Type II anodizing
Teeth : 28T, 30T, 32T, 34T - 26T oval chainring has an ovality of 24/28T and is best for someone who uses currently 24 or 26T round ring - 28T oval chainring has an ovality of 26/30T and is best for someone who uses currently 26 or 28T round ring - 30T oval chainring has an ovality of 28/32T and is best for someone who uses currently 29 or 30T round ring - 32T oval chainring has an ovality of 30/34T and is best for someone who uses currently 31 or 32T round ring - 34T oval chainring has an ovality of 32/36T and is best for someone who uses currently 33 or 34T round ring
Shape : Oval
Mount : Direct Mount
Offset : 3 mm
Chainline : 52 mm
Crankset compatibility : Sram Boost DUB, GXP and BB30 LONG SPINDLE XX1, X01, X0, X9, X7, S2210, S1400 and Truvativ AKA
Chain options : 10, 11, 12 spd chain for geared bike or 6-8 spd for SS. If used in 1x9 drivetrain - 10spd chain must be used to obtain the performance. (yes - 10spd chain will work great on 9spd cassette)
Chainguide needed : No. (but for very aggressive enduro riding it is recommended to use an upper chain guide or at minimum bashguard.)
Oval chainring does not affect the work of rear dérailleur cage at all (video here). Such a ring can be used therefore in 1x9/10/11/12 combination as well as Singlespeed and fixie bikes
Chain Length : Bypassing the rear derailleur, run the chain around front chainring/largest cog combination. (For the full suspension frame, position the rear suspension for the greatest chain length required. It's usually a normal position where rear shock if fully extended) Add 2 to 4 segments of the chain to this length for proper chain length.
Designed in UK. Manufactured in Poland (EU)
Colour : Titanium
Weight
26 teeth : 48 gr
28 teeth : 50 gr
30 teeth : 55 gr
32 teeth : 59 gr
34 teeth : 66 gr
If you wish to check for frame clearance with new oval ring, below you can find measurement of biggest dimension of the oval (tip to tip of tooth): 26T : 118 mm , 28T : 127 mm , 30T: 134 mm ; 32T: 143mm ; 34T: 151mm
De prime à bord de qualité plus cas essayer