The ProGuard is RRP's amazing new range of FRONT and REAR mudguards for disc brake mountain bikes offering unmatched protection from mud and spray, it’s perfect for Trail, Enduro or Downhill racers and essential for the weekend warrior looking for the very best protection. The ProGuard REAR comes in 2 sizes : MINI and STANDARD and is made from super high impact recyclable polypropylene, the finish is matte black with gloss highlights for the logo’s and centreline.
Features
- SNAP-OFF HOLE COVERS REDUCE SPRAY FROM TRAVELLING THROUGH UNUSED HOLES
- REAR FLICK OFFERS EVEN MORE PROTECTION WHEN THE WHEEL IS TURNED
- STICKER RECESS OFFERS GREATER PROTECTION FOR STICKER ADHESIVE
- MINI MIDS 325 MM LONG
- STANDARD MIDS 545 MM LONG
Included
- One Proguard Rear mudguard
- 6 zip ties
Fitting
- Slide the guard into position with the wheel in
- Hold the guard in position making sure it tracks the tyres equally both ends
- You can now see which holes you need for the most secure fit to your frame
- Remove guard and push out / snap-off these holes
- NOTE: Add clear tape to areas the guard contacts the frame to reduce scratches
- Tighten zip ties lightly, stand back and check alignment
- You can still grab the arms around the frame seatstay and twist them to raise/lower the back or front of the guard for final adjustment if needed
- Once happy you must tighten the zip ties with fat pliers as tight as possible (remember zip ties don’t’ scratch frame….loose zip ties do!)
- Cut off excess zip ties
- Before use, ensure the guard doesn't hit the frame when bottoming
Important
- Remove mudguard every few rides to clean the frame
- DO NOT USE IN STICKY / CLAGGY MUD AS IT MAY BLOCK AND CAUSE INJURY OR DAMAGE
- INSPECT BEFORE YOU RIDE: DO NOT USE IF DAMAGED IN ANY WAY AS CONTINUED USE MAY LEAD TO FAILURE OR INJURY
Weight : 67 gr in Mini and 100 gr in Standard
Commande rapide, livraison rapide, produits de qualité, très satisfait